ARMORFIX 112
HIGH PERFORMING FAST SET TILE ADHESIVE
Product Description
ARMORFIX 112 is a grey colored, polymer enriched, cementitious flexible tile adhesive with high performing, fast setting, and waterproof cement based tile adhesive. It is suitable for thin and thick bed applications, internal and external applications.
It is suitable for the fixing of porcelain and ceramic tiles on floor and wall of concrete, concrete block and cement render. It can also be used for the fixing of glass mosaic, stone marble, Precast concrete facings, terrazzo and brick slips. It can also be used for fixing tiles on gypsum plaster, plaster board, chipboard and wood. It is suitable for use in Swimming pools as well. It is specifically suitable for projects with tight schedule requiring grouting within 4 hours.
- High adhesive tensile strength
- Non-slip & Excellent grab
- suitable for large tiles
- Fast curing time, grouting can be carried out the same day within 3-4 hours
- Conforms to EN 12004 Class C2TF
- compensates changes in temperature and elongations of the
- Non sag properties with high initial adhesiveness
- Greater workability due to high port life
- Impressive waterproof properties
Wet areas including kitchen, bathrooms & Showers in domestic, institutional, commercial and industrial location
- Tile on tile
- For internal &external applications
- For fixing tiles on bonded waterproofing membranes such as ARMORCOAT 1K/2K
- For Floors, Walls, Podium decks, roofs including large format
- For laying non-moisture sensitive natural stone
- For Laying Ceramic, Porcelain, Fully vitrified tiles and brick
- For Swimming
- For substrates such as cement screed surfaces, precast concrete elements, masonry, ground anhydrite and/or gypsum based floated screed aerated concrete, heated screeds, plasterboards, gypsum fibre boards, plaster and existing floors and
Surface Preparations:
The substrate must be fully cured and well prepared, it must be sound, clean, structurally stable, free from dirt, loose particles, efflorescence, chemicals and other contaminants, in order to ensure proper bonding.
Freshly installed cement screeds must not have residual moisture content above 5 %. Concrete, screeds, renders, and block work should be cured sufficiently to allow for most of the shrinkage movements. Tiles must be dry, and their surfaces free of contaminants that could impair adhesion. Do not soak tiles in water before lying.
Mixing
Pour A R M O R F I X -112 into a clean plastic or metal bucket containing clean water, pour adequate quantity of ARMORFIX-112, that can be used within the pot life of 4 hours. 20kg of ARMORFIX -112 requires approximately 6 litres of water. Stir with a mechanical stirrer until a plastic, lumps free consistency is achieved. Let the mixture rest for 2-3 minutes and restart briefly before application. No more water should be added after mixing.
Application:
Spread ARMORFIX -112 tile adhesive mortar evenly over 1m2 areas at a time using a notched trowel. Fix tiles immediately within the open time of 20- 40 minutes. Please be sure that all areas are covered with ARMORFIX -112 tile adhesive.
Position tiles in the adhesive bed and align with a slightly pushing motion, ensuring the tile back achieves full contact with the adhesive.
For thin solid bed application (3mm thickness) 4- 5kg of ARMORFIX -112 will cover approximately 1m2.
20kg bags. Store in a cold dry place. With proper storage material can be stored and used within 12 months.
| |||||||||||||||||||||||||
Remove the excess mortar on tools with copious amount of water; if already dry you can remove through mechanical means. Also prolonged contact with skin may occur as it is the case with all cementitious based material, therefore safety gloves and glasses should be used when working.
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty either e x p r e s s e d or implied. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. Nothing contained in any supplied materials relieves the user of the obligation to read and follow the warnings and instruction for each product as set forth in the current Technical Data Sheet, product label and Safety Data Sheet prior to product use away.
Armorsil Manufacturing supplies products that comply with the properties shown on the current datasheets. In the unlikely event that products supplied are proved not to comply with these properties, then we will replace the non-compliant product or refund the purchase price. Armorsil Manufacturing does not warrant or guarantee the installation of the products as it does not have control over the installation or end use of the products. Any suspected defects must be reported to Armorsil Manufacturing in writing within seven working days of being detected.
Armorsil Manufacturing. Makes no warranty as to merchantability or fitness for a particular purpose and this warranty is in lieu of all other warranties express or implied. Neither seller nor Armorsil Manufacturing shall be liable to the buyer or any third person for any injury, loss or damages of any sort including remote or consequential damages, down time, or delay directly or indirectly resulting from use of or inability to use the product. . The information contained in the latest data sheet supersedes all previously published editions. Visits to site by Armorsil personnel do not constitute supervisory responsibility. Armorsil reserves the right to alter the information contained in this datasheet without prior notice
