ARMOR TILE CLEANER
ACID BASED CLEANER
Product Description
Amor Tile Cleaner AB is used for cleaning internal or external surfaces that have been grouted using cementitious grouts. It contains surfactants that give it a cleaning ability. Armor Tile Cleaner is Fast acting general purpose cleaner specially designed for regular cleaning of dirt and stains on tile surfaces, designed for daily maintenance of tiles.
- Ready and Easy to Use
- Removes cementitious residues, organic& rust stains
- Ideal for Interior & Exterior
- No Clinging Action
- No Harsh Abrasivesoist substrates and allows concrete breathe
Porcelain, ceramic, glass mosaics, quarry tiles, terracotta and acid-resistant natural stone and easily removes installation, cementitious grout and adhesive residues from the installed material leaving a perfectly clean surface. It can be used in many dilutions depending upon the specific type of use. ARMOR TILE WATER BASED is recommended for Marbles.
Shake well before and during use. The product can be used undiluted or diluted with water according to the level of concentration necessary for the specific task and the type of surface to be treated.
For the removal of cementitious grout and adhesive residues from acid-resistant surfaces, we recommend dilution between 1:10 and 1:5 depending upon the level of residues to be removed and the type of surface to be treated. Apply the diluted solution to the surface and leave in contact for 5 minutes. Then work across the surface using either a single-disc cleaning machine or an emulsifying pad or clean, damp cloth or sponge. Remove the solution from the surface and then rinse with plenty of clean water. For heavy residues you may need to repeat the above procedure.
- Provide adequate ventilation in enclosed areas to facilitate proper drying
- Do not puddle
- Apply when concrete surface temperatures are 40°F (4°C) and
Coverage depends on intensity of stain, porosity, texture, surface absorption, weather, time solution left on surface and application methods.
Shelf life is 24months in unopened containers when properly stored. Do not allow to freeze.
- Wear protective gloves and goggles
- Make sure before use that the surfaces to be cleaned are acid-resistant. It is advisable, in doubtful cases, to carry out preliminary
- Use in a well-ventilated area
- Avoid prolonged skin contact and absolutely no contact with all food stuffs
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty either e x p r e s s e d or implied. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. Nothing contained in any supplied materials relieves the user of the obligation to read and follow the warnings and instruction for each product as set forth in the current Technical Data Sheet, product label and Safety Data Sheet prior to product use away.
Armorsil Manufacturing supplies products that comply with the properties shown on the current datasheets. In the unlikely event that products supplied are proved not to comply with these properties, then we will replace the non-compliant product or refund the purchase
Armorsil Manufacturing does not warrant or guarantee the installation of the products as it does not have control over the installation or end use of the products. Any suspected defects must be reported to Armorsil Manufacturing in writing within seven working days of being detected.
