ARMORPATCH 100

ARMORPATCH 100 is a water repellent, corrosion inhibiting, polymer modified shrinkage compensated, fiber reinforced, rapid setting, high strength mortar specially formulated for structural concrete repairs in vertical and horizontal surfaces. ARMORPATCH 100 has impressive water repellent and waterproofing properties and therefore suitable for areas requiring waterproofing protection.

Description

ARMORPATCH 100 is a water repellent, corrosion inhibiting, polymer modified shrinkage compensated, fiber reinforced, rapid setting, high strength mortar specially formulated for structural concrete repairs in vertical and horizontal surfaces. ARMORPATCH 100 has impressive water repellent and waterproofing properties and therefore suitable for areas requiring waterproofing protection.

  • Interior and exterior
  • Leveling and repair of horizontal concrete surfaces
  • Structural repairs
  • Parking & bridge decks
  • Industrial floors

TYPICAL APPLICATIONS

ARMORPATCH can be used for all structural concrete repairs such as:

  • Interior and exterior concrete surfaces
  • Repair of horizontal and vertical surfaces
  • Repair concrete sidewalks, concrete spalling
  • Industrial floors
  • Parking lots and bridge decks

ADVANTAGES AND BENEFITS

  • Recommended for areas requiring moisture remediation
  • Aesthetically nice self leveling and smooth finish
  • Fiber reinforced to eliminate crack and increase strength
  • Good corrosion Inhibition property, therefore protect reinforcements
  • Minimal shrinkage and outstanding resistance to crack
  • Excellent bond strength
  • High abrasion resistance

SURFACE PREPARATION

Prepare concrete substrate in accordance with International Concrete Repair Institute (ICRI) Technical Guideline. Remove all unsound concrete and provide a profiled, porous surface. Substrate must be structurally sound, dust-free, and free of grease, oil, dirt, curing compounds, release agents, or any other surface or penetrated contaminants that will adversely affect bond. Pressure wash the surface with a commercial pressure washer (3000 psi, 4 GPM) (21MPa, 0.25 L/s) and allow to fully dry before application

PRIMING:  in most instances priming will not be needed but for vertical surfaces and very porous concrete Apply one coat of ARMORPRIME 400 acrylic primer to allow for good bonding and adhesive purpose.

APPLICATION INSTRUCTION

MIXING:  Pour 3.3 to 3.8litres of water into a clean plastic or metal bucket, pour 70% of ARMORPATCH 100 into the clean bucket of water, then mix with a power mixer at 400 RPM, after two minutes of mixing pour the rest of the material and mix until full homogeneity is achieved

DOWNLOAD DATA SHEET

Reviews

There are no reviews yet.

Be the first to review “ARMORPATCH 100”

Your email address will not be published. Required fields are marked *

Product Enquiry

TOP