ARMORPATCH 300

ARMORPATCH 300 is a two component, water resistant corrosion inhibiting, polymer modified shrinkage compensated, rapid setting, high strength mortar specially formulated for structural concrete repairs in vertical and horizontal surfaces. ARMORPATCH 300 has impressive water repellent and waterproofing properties and therefore suitable for areas requiring waterproofing.

Description

ARMORPATCH 300 is a two component, water-resistant corrosion inhibiting, polymer modified shrinkage compensated, rapid setting, high strength mortar specially formulated for structural concrete repairs in vertical and horizontal surfaces. ARMORPATCH 300 has impressive water repellent and waterproofing properties and therefore suitable for areas requiring waterproofing.

TYPICAL APPLICATIONS

ARMORPATCH 300 can be used for all structural concrete repairs such as:

  • Interior and exterior concrete surfaces
  • Repair of horizontal and vertical surfaces
  • Repair concrete sidewalks, concrete spalling
  • Parking lots and bridge decks
  • Fast setting and curing, can be put to use in few hours (depending on temperature)
  • Industrial floors

ADVANTAGES AND BENEFITS

  • Water repellent and waterproof
  • A Recommended for areas requiring moisture remediation
  • Aesthetically nice self-leveling and smooth finish
  • Fiber reinforced to eliminate crack and increase strength
  • Good corrosion Inhibition property, therefore protect reinforcements
  • Minimal shrinkage and outstanding resistance to crack
  • Excellent bond strength
  • High abrasion resistance

SURFACE PREPARATION

Prepare concrete substrate in accordance with International Concrete Repair Institute (ICRI) Technical Guideline. Remove all unsound concrete and provide a profiled, porous surface. Substrate must be structurally sound, dust-free, and free of grease, oil, dirt, curing compounds, release agents, or any other surface or penetrated contaminants that will adversely affect bond. Pressure wash the surface with a commercial pressure washer (3000 psi, 4 GPM) (21MPa, 0.25 L/s) and allow to fully dry before application

PRIMING: in most instances priming will not be needed but for vertical surfaces and very porous concrete Apply one coat of ARMORPRIME 400 acrylic primer to allow for good bonding and adhesive purpose.

DOWNLOAD DATA SHEET

Reviews

There are no reviews yet.

Be the first to review “ARMORPATCH 300”

Your email address will not be published. Required fields are marked *

Product Enquiry

TOP