HYDROPLAST 300

HYDROPLAST-300 is a glenium new generation high performing polycarboxylate ether super plasticizer with impressive water reducing and slump retention properties.

HYDROPLAST-300 allows for the  production high consistency mixed batches with low water –cement ratio , ensures  a controlled extended workability and improves early strength development. HYDROPLAST-300  is suitable for HOT and Cold Weather climate , minimizes bleeding and segregation tendencies.

Description

Product Description:

HYDROPLAST-300 is a glenium new generation high performing polycarboxylate ether super plasticizer with impressive water reducing and slump retention properties.

HYDROPLAST-300 allows for the  production high consistency mixed batches with low water –cement ratio , ensures  a controlled extended workability and improves early strength development. HYDROPLAST-300  is suitable for HOT and Cold Weather climate , minimizes bleeding and segregation tendencies.

Working Principle

HYDROPLAST-300 improves the cement dispersion within the concrete significantly. This property allows for the formation of a homogeneous and low viscosity cement paste which ensures an improved workability, extended workability and slump retention.

Primary Uses:

HYDROPLAST-300 is typically used to produce:

  • Ready mix concrete
  • Precast concrete
  • Use in concrete where delayed setting and extended workability are desired.
  • Mass-concrete pours.
  • Ready-mixed concrete.
  • Long distance transportation of concrete.
  • Pumped concrete.
  • Hot weather concreting.
  • All concrete works where good workability and increased waterproofing properties are required. Such as: swimming pools, sea walls, tunnels, bridges, basement, etc.

HYDROPLAST-300 has been incorporated in concrete used for

  • All types of high rise construction
  • Purification structures
  • Pre-stressed beams
  • Foundation piles
  • Diaphragm wall
  • Towers and chimneys
  • Tunnel linings
  • Irrigation canals
  • Airfield runways and roads

Advantages:

  • Reduced mixing water while maintaining same workability.
  • Improved workability & pumping properties.
  • Improved physical & mechanical properties.
  • Improved surface finish.
  • Improved cohesion minimizes risks of segregation, bleeding and creep.
  • Denser concrete improves waterproofing properties and protection of reinforcement steel against detrimental water-borne ion attack.
  • Water-based, non-flammable, non-toxic.
  • Chloride-free; suitable for pre-stressing.
  • Specially formulated for hot weather concreting.
  • Increased compressive and flexural strength.

Standards:

HYDROPLAST-300 is formulated to comply with all the requirements of:

  • ASTM C- 494, Type A
  • EN 943, Part 2,  Tables 1 and 2

DOWNLOAD DATA SHEET

Reviews

There are no reviews yet.

Be the first to review “HYDROPLAST 300”

Your email address will not be published. Required fields are marked *

Product Enquiry

TOP