ARMORKRYSTAL400
CRYSTALLINE INTEGRAL WATERPROOFING ADMIXTURE
Product Description
ARMORKRYSTAL 400 – Krystal Integral Membrane is a crystalline Integral waterproofing admixture designed to resist hydrostatic pressure and for all concrete requiring primary waterproofing. The innovative crystalline technology within ARMORKRYSTAL 400 reacts with moisture, silicate and free lime, a natural byproduct of the cement hydration process.
The reaction creates millions of nano-crystals which grow throughout the concrete pores and capillary tract. It is specifically used for the treatment of concrete and concrete products to protect against water intrusion, leakage, cracking, chemical attack.
- Extremely resistant to pressure from both negative and positive.
- reduces permeability of concrete
- increases compressive strength of the concrete.
- protects reinforcement from corrosion and aggressive chemicals
- Non-toxic
- reduces shrinkage and cracking of concrete
ARMORKRYSTAL 400 can be used for the structural waterproofing of all concrete structures such as:
- Reservoirs
- Sewage and Water Treatment Plants
- Foundation and retaining Wall
- Secondary Containment Structures
- Tunnels and Subway Systems
- Swimming Pool
- Concrete Slabs and Precast panels
ARMORKRYSTAL 400 are packed in 20kg buckets. Store in a cold dry place.
With proper storage material, can be stored and used within 12 months.
Standard dosage for AQUASEAL 100 is 0.5kg
per 50kg bag of cement. Varies with water
content
Armorsil provides detailed method statements
on all its products for use in various applications.
Below is an information summary for guidance
The recommended dosage for Aquaseal 100 is
0.5 kg per bag of 50kg cement. Note that
optimum dosage to meet specific requirements
should always be determined by trial mixes using
admixture on site
Conforms to the requirements of BS EN 934-2
Table 9
Appearance: White
Like all material that contains Portland cement,
this material must be handled professionally as
it can cause irritation and burns. Therefore
contact with skin and eyes must be avoided.
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but
accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty either expressed or
implied. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. Nothing contained in any supplied materials relieves the user of the obligation to read and follow the warnings and instruction for each product as set forth in the current Technical Data Sheet, product label and Safety Data Sheet prior to product use away. Armorsil Manufacturing supplies products that comply with the properties shown on the current datasheets. In the unlikely event that products supplied are proved not to comply with these properties, then we will replace the non-compliant product or refund the purchase price. Armorsil Manufacturing does not warrant or guarantee the installation of the products as it does not have control over the installation or end use of the products. Any suspected defects must be reported to Armorsil Manufacturing in writing within seven working days of being detected. Armorsil Manufacturing. Makes no warranty as to merchantability or fitness for a particular purpose and this warranty is in lieu of all other warranties express or implied. Neither seller nor Armorsil Manufacturing shall be liable to the buyer or any third person for any injury, loss or damages of any sort including remote or consequential damages, down time, or delay directly or indirectly resulting from use of or inability to use the product. . The information contained in the latest data sheet supersedes all previously published editions. Visits to site by Armorsil personnel do not constitute supervisory responsibility. Armorsil reserves the right to alter the information contained in this datasheet without prior notice
