Pour the material on the area to be resurfaced using a smoothing trowel ,because of the selfleveling property of ARMORFLO 300 the material can easily be finished as desired, spike roller will be used to eliminate entrapped air or bubbles and to give a uniform appearance. The level of thickness will also be determined by the application need, but should be achieved in one application; the mixed material can be applied at a thickness between 3mm and 20 mm. If the mix hardens, it should be disposed, please do not attempt to remix or add water to hardened mix.

Remove the excess mortar on tools with copious
amount of water; if already dry you can remove
through mechanical means. Also prolonged
contact with skin may occur as it is the case with all
cementitious based material, therefore safety
gloves and glasses should be used when working.

ARMORFLO 300 should be specified for factory floors, warehouses , hospitals etc and un derlayment  for floor coverings. It is particularly
suitable for areas requiring hardwearing and durable flooring.

ARMORFLO 300 is packed in 20 kg and 25kg bags
.Store in a cold dry place. With proper storage
material can be stored and used within 12 month

Chloride content: NIL
Appearance: milky tea low viscous Liquid
Density: 1.19 g/cm3
PH Value: 7 -9
Air entrainment: < 2%
Packaging: 20L

All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty either e x p r e s s e d or implied. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of
the product. Nothing contained in any supplied materials relieves the user of the obligation to read and follow the warnings and instruction for each product as set forth in the current Technical Data Sheet, product label and Safety Data Sheet prior to product use away. Armorsil Manufacturing supplies products that comply with the properties shown on the current datasheets. In the unlikely event that products supplied are proved not to comply with these properties, then we will replace the non-compliant product or refund the purchase price. Armorsil Manufacturing does not warrant or guarantee the installation of the products as it does not have control over the installation or end use of the products. Any suspected defects must be reported to Armorsil Manufacturing in writing within seven working days of being detected. Armorsil Manufacturing. Makes no warranty as to merchantability or fitness for a particular purpose and this warranty is in lieu of all other warranties express or implied. Neither seller nor Armorsil Manufacturing shall be liable to the buyer or any third person for any injury, loss or damages of any sort including remote or consequential damages, down time, or delay directly or indirectly resulting from use of or inability to use the product. . The information contained in the latest data
sheet supersedes all previously published editions. Visits to site by Armorsil personnel do not constitute supervisory responsibility. Armorsil reserves the right to alter the information contained in this datasheet without prior notice