Spread ARMORFIX -108 tile adhesive mortar evenly over 1m² area at a time using a notched trowel. Fix tiles immediately within the open time of 20 – 40 minutes. Please be sure that all areas are covered with ARMORFIX 108.
Grouting should be done 24 hours after tiling, for SWIMMING pool leave at least 3 days before grouting and at least one week before ﬁlling.
The consumption is determined by the size of the tiles, placement techniques and the conditions of the substrate. Rough surfaces consume more materials. See table in technical information for guidance.
(20 x 20cm – 40 x 40cm)
20 -40 minutes
–10 to 100°C and frost resistant when set
3.6 litres per 20 kg
Note: setting times are quoted at 20°C – 30°C and are temperature and humidity dependent.
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty either e x p r e s s e d or implied. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. Nothing contained in any supplied materials relieves the user of the obligation to read and follow the warnings and instruction for each product as set forth in the current Technical Data Sheet, product label and Safety Data Sheet prior to product use away.
Armorsil Manufacturing supplies products that comply with the properties shown on the current datasheets. In the unlikely event that products supplied are proved not to comply with these properties, then we will replace the non-compliant product or refund the purchase price. Armorsil Manufacturing does not warrant or guarantee the installation of the products as it does not have control over the installation or end use of the products. Any suspected defects must be reported to Armorsil Manufacturing in writing within seven working days of being detected.