Mix 5 kg of ARMOR JOINT PRO 200 with 1.15 to 1.25 Lit. of clean cool water by adding the powder over the water gradually. The amount of mixing water must be respected to avoid efﬂorescence over the surface of the grout. An electric mixer with low rotation speed (< 300 rpm) should be used. Mix for about 3 to 5 minutes until a uniform lump free paste is obtained. Remix thoroughly until the ﬁnished mix has a very creamy consistency and uniformly coloured and allow the mixture to stand for a few minutes before use. water gradually. The amount of mixing water must be respected to avoid efﬂorescence over the surface of the grout. An electric mixer with low rotation speed (< 300 rpm) should be used. Mix for about 3 to 5 minutes until a uniform lump free paste is obtained. Remix thoroughly until the ﬁnished mix has a very creamy consistency and uniformly coloured and allow the mixture to stand for a few minutes before use.
Apply ARMOR JOINT PRO 200 with a rubber spatula into the joints diagonally by ﬁlling all the gaps, make sure that the product is well compacted with no voids. Use the product within a maximum of 45 min (depending on temperature) after mixing.
Allow the grout to dry (10 or 20 minutes depending on the weather condition) before starting the cleaning process, remove surplus with a damp sponge moving diagonally to prevent removal of grout within the joints. Rinse the sponge frequently using two water containers, one to remove the grouts residue and the other one to clean the sponge. Avoid excess of water while cleaning to prevent discoloration of joints. When dry, polish the tiles with a clean, dry cloth. Do not spray water under high pressure and avoid using any chemical cleaning agent on the grout until 3 days after the application.
In case of hot or windy conditions, it is recommended to dampen the joint a few hours after application of ARMOR JOINT PRO 200, it improves its ﬁnal performance.
Examples of consumption (in kg/m2):
Tile size(cm) / Joint width(mm)
2.5 x 2.5*
15 x 15
30 x 30
60 x 60
Indicative consumptions calculated with a tile thickness of 8mm In the case of mosaics with a size of 2.5 x 2.5 cm, the tile thickness of 5mm was used to calculate the consumption. These values only give an indication about the grout consumption.
The real product consumption can differ depending on site conditions and wastage when grouting. This formula does not include application wastage.
TILE GROUT CONSUMPTION FORMULA:
C = 0.18 x E x H x [(L + W)/(L x W)]
C: Consumption (kg/m²) E: Joint Width (mm) H: Tile Thickness (mm) L: Tile Length (cm) W: Tile Width (cm)
ARMOR JOINT PRO 200 can be stored for 2 years in its original packaging, stored away from extreme temperatures and in dry conditions.
The product contains cement powders which, when mixed with water, release alkalis that could be harmful to the skin. It is preferable that the application be done in a ventilated area, and to wear protective gear for hands, eyes and respiratory system and to avoid breathing of the dust. Splashes on the skin should be washed away by cleaning thoroughly with soap and water.
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty either e x p r e s s e d or implied. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. Nothing contained in any supplied materials relieves the user of the obligation to read and follow the warnings and instruction for each product as set forth in the current Technical Data Sheet, product label and Safety Data Sheet prior to product use away.
Armorsil Manufacturing supplies products that comply with the properties shown on the current datasheets. In the unlikely event that products supplied are proved not to comply with these properties, then we will replace the non-compliant product or refund the purchase price. Armorsil Manufacturing does not warrant or guarantee the installation of the products as it does not have control over the installation or end use of the products. Any suspected defects must be reported to Armorsil Manufacturing in writing within seven working days of being detected.
Armorsil Manufacturing. Makes no warranty as to merchantability or ﬁtness for a particular purpose and this warranty is in lieu of all other warranties express or implied. Neither seller nor Armorsil Manufacturing shall be liable to the buyer or any third person for any injury, loss or damages of any sort including remote or consequential damages, down time, or delay directly or indirectly resulting from use of or inability to use the product. . The information contained in the latest data sheet supersedes all previously published editions. Visits to site by Armorsil personnel do not constitute supervisory responsibility. Armorsil reserves the right to alter the information contained in this datasheet without prior notice