ARMORTOP 300HD
DRY SHAKE SURFACE HARDENER
Product Description
ARMORTOP 300 HD – is a liquid ready-to-use concrete floor densifier, hardener, and dustproof. It is VOC compliant. ARMORTOP 300 HD penetrates into the concrete surface, starting a chemical reaction that fills in the pores of the concrete, producing a substantially
denser concrete with improved durability and improved dust-proofing properties.
- Provides improved chemical and abrasion
resistance - Dustproof and colourless.
- Penetrates deeply into concrete thereby
densifying and preventing of harmful chemical - It is ready to use and easy to apply.
- Provides anti scratch surface that won’t discolour
- VOC compliant
ARMORTOP 300 HD is recommended for use in old and new concrete, where chemical resistant, dustproof and improved abrasion resistant surfaces
are required such as:
- Factory and industrial floor areas
- Warehouses and storage Silos
- Car parks and packing structures
- Food processing plants
- Gas and Petrol Stations
- Airports and Stadiums etc
Surface Preparations:
The surface must be clean, free from loose particles,laitance, grease, wax, dirts and all foreign materials before application % by weight of cement. Consult with ARMORSIL’s Technical Department for
assistance in verifying the appropriate dosage rate and for further information regarding enhanced
chemical resistance and optimum concrete performance for your project. Application Instructions:
Material must be stirred well before application. Apply directly in undiluted form to the concrete in
ratio of 2-3 square metre per litre. Note that consumption also depends on surface porosity.
Material can be applied with sprayer, squeegee or broom. Ensure all concrete surface is saturated for about 30- 60 mins with Armortop. In hot weather surfaces may need to be continuous saturated to prevent evaporation before penetration. In order to ensure that material penetrates deeply
and quickly ARMORTOP 300 HD can be worked into the concrete with a broom or mechanical scrubber
CURING
After application, wait till surface becomes jelly or slippery, thoroughly flush the surface with water and scrub with brooms. Failure to properly saturate with water and remove the excesses may lead to unsightly white patches, this will not though affect the
performance.
SETTING TIME AND STRENGTH
ARMORTOP 300 HD dries fast ; it usually cures with in 2 to 12 hours depending on the Weather and climatic conditions
ARMORTOP 200HD c o n t a i n s cement that
when in contact with bodily fluid may cause
irritation and other allergic reaction to those
predisposed. . Safety gloves and googles should
be won when mixing or applying ARMORTOP. If
ARMORTOP 200HD comes in contact with bodily
fluid or eyes rinse immediately with copious
amount of water and seek medical attention
immediately. Please refer to the most recent MSDS
for more information.
ARMORTOP 300 HD is specified for old concrete
or already placed concrete on or before 28 days of
curing.
Color Transparent Brownish
Density 1.15 kg/lt
pH Mixing 11.5 With water
Application Temperature +5°C to +35°C
ARMORTOP 300 HD a non-hazardous solution,
however because it is used with portland cement
it should be known prolonged contact with skin by
Portland cement may lead to irritation, as it is the
case with all cementitious based material,
therefore safety gloves and glasses should be
used when working with cement.
12 months in original, unopened container
ARMORTOP 300 HD are packed in 20 litres and
200 litres drums. Store in a cold dry place. With
proper storage material can be stored and used
within 12 months
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty either e x p r e s s e d or implied. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of
the product. Nothing contained in any supplied materials relieves the user of the obligation to read and follow the warnings and instruction for each product as set forth in the current Technical Data Sheet, product label and Safety Data Sheet prior to product use away. Armorsil Manufacturing supplies products that comply with the properties shown on the current datasheets. In the unlikely event that products supplied are proved not to comply with these properties, then we will replace the non-compliant product or refund the purchase price. Armorsil Manufacturing does not warrant or guarantee the installation of the products as it does not have control over the installation or end use of the products. Any suspected defects must be reported to Armorsil Manufacturing in writing within seven working days of being detected. Armorsil Manufacturing. Makes no warranty as to merchantability or fitness for a particular purpose and this warranty is in lieu of all other warranties express or implied. Neither seller nor Armorsil Manufacturing shall be liable to the buyer or any third person for any injury, loss or damages of any sort including remote or consequential damages, down time, or delay directly or indirectly resulting from use of or inability to use the product. . The information contained in the latest data
sheet supersedes all previously published editions. Visits to site by Armorsil personnel do not constitute supervisory responsibility. Armorsil reserves the right to alter the information contained in this datasheet without prior notice
