HYDROPLAST 60
SUPER-PLASTICIZER FOR PLASTER AND MORTAR PLACEMENT
Product Description
HYDROPLAST-60 is a high performance, liquid, water- reducing “plasticizer” admixture formulated to improve the plasticity, cohesiveness and durability of mortar and plaster.
Once incorporated in the mix, HYDROPLAST-60 is a readyto-mix admixture that produces a plasticizing effect by reducing the surface tension of mixing water. It has excellent air entrainment properties which controls the amount of microscopic air bubbles and increase the cohesion of mortar and plaster. It is specially researched for the placement of plaster and mortar.
- Reduced mixing water while maintaining same
- Less wear of moulds & improve
- Improves the early strength & cycle time of plaster and
- Improved physical & mechanical
- Applicable for all Portland and Slag
- Reduces permeability in mortar and increases durability
- Improved cohesion, minimizes risk of segregation, bleeding and
HYDROPLAST-60 is typically used to produce:
- Plaster Placement
- Mortar Placement
HYDROPLAST-50 is formulated to comply with all the requirements of:
- ASTM C- 494, Type A
- EN 943, Part 2, Tables 1 and 2
- Wear protective gloves and eye protection during work
- Avoid contact with eyes and skin
- If skin contact occurs, wash skin thoroughly
- If in eyes, hold eyes open and flood with warm water and seek medical attention immediately
1.Precautions for safe handling:
Avoid aerosol formation. Avoid inhalation of mists/vapours. Avoid skin contact.
No special measures necessary provided product is used correctly.
2.Conditions for safe storage, including any incompatibilities.
Further information on storage conditions: Keep only in the original container in a cool, dry, well ventilated place away from ignition sources, heat or flame. Protect from direct sunlight.
3.Dispose of contents/container to hazardous or special waste collection point.
Appearance: Dark brown liquid
Specific Gravity: 1.175 ± 0.005 at 20° C
Form: Liquid.
Smell: Pungent.
Chloride content: Nil
Additional air-entrainment: Less than 1%
Water-reduction: 10–20 % of mixing water
Setting Time: No effect at the recommended dosages.
Permeability: Reduces concrete porosity, improves waterproofing and durability.
Compressive strength: Increased early and ultimate compressive strengths
Cohesion: Improved cohesion reduces risk of segregation
Compatibility: Compatible with all types of Portland cement including Sulfate Resisting Cement (SRC)
Dosage is influenced by cement type, mix design, quality of used materials, ambient temperatures and other specific requirements, so site trials should be carried to determine the optimum dosage.
Dosage: typically 1% – 2% by the weight of total cementitious content. In a situation of overdose, this may lead to delay in setting time but ultimately result in higher strength.
HYDROPLAST-60 should be added with the last third of mixing water or immediately after complete mixing water addition. Do not add directly to the dry mix or cement. For proper administration an automatic dispenser shall be used.
An overdose of HYDROPLAST-60 may result depending on dosage in an increase of workability and extension of setting time. Overdosed concrete must be protected against direct sun light and water evaporation.
Reactivity: No hazardous reactions if stored and handled as prescribed/indicated.
Chemical stability: The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions: The product is stable if stored and handled as prescribed/indicated. Conditions to avoid See MSDS section 7 – Handling and storage.
Incompatible materials Substances to avoid: strong acids, strong bases, strong oxidizing agents, strong reducing agents
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty either e x p r e s s e d or implied. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. Nothing contained in any supplied materials relieves the user of the obligation to read and follow the warnings and instruction for each product as set forth in the current Technical Data Sheet, product label and Safety Data Sheet prior to product use away.
Armorsil Manufacturing supplies products that comply with the properties shown on the current datasheets. In the unlikely event that products supplied are proved not to comply with these properties, then we will replace the non-compliant product or refund the purchase price.Armorsil Manufacturing does not warrant or guarantee the installation of the products as it does not have control over the installation or end use of the products. Any suspected defects must be reported to Armorsil Manufacturing in writing within seven working days of being detected.
Armorsil Manufacturing. Makes no warranty as to merchantability or fitness for a particular purpose and this warranty is in lieu of all other warranties express or implied. Neither seller nor Armorsil Manufacturing shall be liable to the buyer or any third person for any injury, loss or damages of any sort including remote or consequential damages, down time, or delay directly or indirectly resulting from use of or inability to use the product. . The information contained in the latest data sheet supersedes all previously published editions. Visits to site by Armorsil personnel do not constitute supervisory responsibility. Armorsil reserves the right to alter the information contained in this datasheet without prior notice
