HYDROPLAST 220
MID-RANGE WATER REDUCING
SUPERPLASTICISER FOR RHEOPLASTIC CONCRETE
Product Description
Hydroplast 220 is ready to use, mid-range water-reducing admixture design to produce high slump concrete with transportable workability. This product is chloride free, and available on-demand.
Hydroplast 220 considerably improves the properties of fresh and harden concrete, it has a shelf life of 12month from date of production.
- Micro-silica concrete
- Mass concrete pours
- Ready mixed concrete
- Long distance transport
- Pumped concrete
- Casting in hot climate
To obtain: - Reduced thermal peaks
- High workability for longer periods
- Low pumping pressure
- Delay setting with longer workability
- Improves durability
- Reduced permeability
All materials, measurement and production are in
accordance with ASTM C-494 type G.
Appearance: Low viscous clear liquid
Density: 1.06g/cm³ ± 0.01
Chloride content: Nil
Air-entrainment: <2%
Water-reduction: 20–30 % of mixing water Permeability: Reduces concrete porosity, improves waterproofing and durability.
Compressive strength: Increased early and ultimate compressive strengths
Cohesion: Improved cohesion reduces risk of segregation
Compatibility: Compatible with all types of Portland cement including Sulfate Resisting Cement (SRC). Compatible with other ARMORSIL admixtures when dispensed separately
Hydroplast 220 is a ready to use liquid which is
dispensed into the concrete together with the mixing
water.
Dosage is influenced by type, mix design; quality of used materials, ambient temperatures and other specific requirements, so site trials should be carried to determine the optimum dosage.
Dosage: typically 0.8% to 1.5%
HYDROPLAST-600 May be added with the initial mix water or should be added with the last third of mixing water. However optimum water reduction is achieved with delayed addition. Do not add directly to the dry mix or cement. For proper administration an automatic dispenser could be used.
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty either e x p r e s s e d or implied. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. Nothing contained in any supplied materials relieves the user of the obligation to read and follow the warnings and instruction for each product as set forth in the current Technical Data Sheet, product label and Safety Data Sheet prior to product use away.
Armorsil Manufacturing supplies products that comply with the properties shown on the current datasheets. In the unlikely event that products supplied are proved not to comply with these properties, then we will replace the non-compliant product or refund the purchase price. Armorsil Manufacturing does not warrant or guarantee the installation of the products as it does not have control over the installation or end use of the products. Any suspected defects must be reported to Armorsil Manufacturing in writing within seven working days of being detected.
Armorsil Manufacturing. Makes no warranty as to merchantability or fitness for a particular purpose and this warranty is in lieu of all other warranties express or implied. Neither seller nor Armorsil Manufacturing shall be liable to the buyer or any third person for any injury, loss or damages of any sort including remote or consequential damages, down time, or delay directly or indirectly resulting from use of or inability to use the product. . The information contained in the latest data sheet supersedes all previously published editions. Visits to site by Armorsil personnel do not constitute supervisory responsibility. Armorsil reserves the right to alter the information contained in this datasheet without prior notice
An overdose of HYDROPLAST-600 may result depending o n dosage in an increase of workability and extension of setting time. Overdosed concrete must be protected against direct sun light and water evaporation to allow proper curing.
Do not use HYDROPLAST 600 with other type of admixture containing Naphthalene
Sulfonate Blends. The performance of the admixture will be adversely affected .
